Best Siding Nailer Reviews and Buying Guide

Siding adds curb appeal to increase value, provides an additional layer of insulation that can reduce energy costs, and protects the structure of your home. When installing or repairing siding, a regular hammer can be used, but a siding nailer is unquestionably more efficient. In order to securely fasten the siding, it drives each nail into the same depth with a single strike.


Finishing nailers are what you’ll find if you’re searching for a nail gun. A finishing nailer, which is used to complete trim, resembles a siding nailer in appearance. Although it may be difficult to tell these models from framing nailers, there is a significant difference.

At the end of this article, we’ll go into more detail about the distinctions between the two, but generally speaking, a siding nailer has nails specifically designed for siding.

The fasteners used with a siding nailer will typically range in length from 1-1/4′′ to 2-1/2′′.

As the name implies, a siding nailer will often be used to install the siding. These nail guns are most often used for siding jobs, though you may see some people utilizing them for other things.

Some people will use a siding nailer for modest chores around the house, but be sure the fastener has the appropriate support.

A siding nailer is a useful instrument that speeds up the completion of the task compared to a regular hammer. To retain the material for a longer duration, they fire shank nails. This functional Instrument is pricey, strong, portable, and simple to use.

The siding nailer’s soft tip prevents damage to the siding material and provides the necessary power for siding on both soft and hard siding materials, such as oak (like cedar).

Numerous nailers come in various sorts and sizes to perform on projects like siding, decking, fencing, surrounds, or sledding.

We advise taking into account the following crucial elements in order to choose the best siding nailer for your requirements.

Nail Size

You can work on various projects with a nailer that uses fasteners (or sizes) of various sizes. This siding nailer typically uses nails between 1 14 and 2 12 inches in length. Use nails that are twice as deep as the surface you are working on.

Operating Pressure

There are a lot of pneumatic siding nailer alternatives available that are powered by an air compressor. Because of this, before purchasing and using a model, you must verify its working pressure. In general, the pressure range will be between 70 and 120 pounds per square inch (PSI), which is how pressure is measured.

To reduce the amount of time spent looking for and purchasing various products, we conducted extensive research on a number of them and shortlisted several Best Siding Nailers. Additionally, we offered a thorough buying guide to assist you in making the best choice possible for your siding needs.

Best Siding Nailers of 2022

BOSTITCH Coil Siding Nailer
  • 1 ½ inch to 2 ½ inch nail length support
  • 70 PSI to 120 PSI operational air pressure
  • 7-year warranty
  • 300 nail capacity magazine
  • Lightweight aluminum design
  • Strong and sturdy build quality
  • Tool-free adjustable exhaust
  • Adjustable depth guide
Freeman Pneumatic Siding Nailer
  • 1 ½ inch to 2 ½ inch nail length support
  • 70 PSI to 120 PSI operational air pressure
  • 7-year warranty
  • 400 nail capacity magazine
  • Ergonomic and grippy handle for ease of use
  • Usable for various applications
  • Value for money
Metabo HPT Coil Siding Nailer
  • 1 ½ inch to 2 ½ inch nail length support
  • 70 PSI to 120 PSI operational air pressure
  • 5-year warranty
  • Magazine on the bottom
  • Tool-free depth adjustment
  • Plastic shield for extra safety
MAX CN565S3 Siding Coil Nailer
  • 1 ½ inch to 2 ½ inch nail length support
  • 70 PSI to 120 PSI operational air pressure
  • 5-year warranty
  • Easy twist adjustable deflector
  • 360-degree exhaust for deflecting air
  • Anti-double fire mechanism
  • Maintenance-free end cap filter
Hitachi Coil Siding Nailer
  • 1 ½ inch to 2 ½ inch nail length support
  • 70 PSI to 120 PSI operational air pressure
  • 5-year warranty
  • Drive 3 nails per second of 2 ½ inch length
  • Weighs 4.8 pounds
  • Drives wire and plastic sheet collated nails
  • Adjustable air deflector for ease of use
DEWALT DW66C-1 Fencing Nailer
  • 1 ½ inch to 2 ½ inch nail length support
  • 70 PSI to 120 PSI operational air pressure
  • 3-year warranty
  • 300 nail capacity magazine
  • Weighs 4.9 pounds
  • Rubber parts for preventing work surface damage
  • Lightweight yet sturdy build quality
  • Works with both wired as well as plastic sheet collated nails

BOSTITCH Coil Siding Nailer

There are many options for Bostitch’s robust and heavy-duty power equipment available. Even the excellent siding nailer for construction that we have provided here in this text is made by them.

The Bostitch N66C siding nailer is included first in this post because it is a fantastic, dependable, and potent alternative for siding nailers. If you are acquainted with Bostitch power tools, you are probably aware that they have a 7-year warranty. You can depend on this durable, well-made siding nailer from Bostitch for a very long time because this is also the case with it.

Even though it is well-built, it is still rather light and portable. Aluminum structure, which provides a balance between strength and weight, makes it possible.

Regarding performance, you obtain results that are fairly comparable to those of the other possibilities available. In terms of length, this offers support for nails that are between 1 14 and 2 12 inches long. And with the aid of an air compressor, these nails can be utilized for siding.

To utilize it effectively, you must set an air pressure range of 70 PSI to 120 PSI. This siding nailer has a terrific magazine that can store up to 300 nails at once, which is perfect for the majority of people out there.


  • Highly reliable
  • Lightweight and portable design
  • Decent performance


  • Slightly expensive
  • Lacks accessories

Freeman Pneumatic Siding Nailer

When compared to other prominent manufacturers, Freeman is another well-known manufacturer of power tools, but it offers far more reasonably priced goods. Even a fantastic Freeman siding nailer choice is available for usage in the building.

Given its excellent level of dependability, Freeman’s PCN65 pneumatic siding nailer is listed in second place in this article. But in contrast to other solutions that include a 7-year warranty, this one is significantly less expensive and provides the user with value for their money.

For the price, the construction quality of this siding nailer is also fairly good. When building a house, you can also use siding nails that are between 1 and 2 inches long. With the aid of its adjustable and inclined head, these nails may even be put at a 15-degree angle if necessary.

This siding nailer is as ergonomic and lightweight as its name suggests. This is made possible by the grip handle, which enables prolonged use. However, to use this siding nailer, your air compressor must maintain an air pressure of 70 PSI to 120 PSI.

Even for heavy-duty or industrial applications, its nail magazine can contain up to 400 nails at once, which is quite a large capacity. These nails can be used for many different things, including fencing, sheathing, and cement siding.


  • Great value for money
  • High nail capacity
  • Highly reliable and durable


  • Average build quality
  • Slightly large design

Metabo HPT Coil Siding Nailer

The name Metabo HPT refers to a company that primarily manufactures heavy-duty power tools and equipment. As a result, its consumer-grade siding nailer is both fairly powerful and trustworthy.

If you’re looking for extremely powerful pneumatic siding nailers, this Metabo HPT NV65AH2 siding nailer is listed in the third position in this article. This siding nailer can be used for siding with nails that range in length from 1 12 to 2 12 inches. Depending on your demands and requirements, these nails can be wire or plastic sheet collated.

This siding nailer’s tool-free adjustment mechanism makes it very simple to vary the depth, which is another wonderful feature. When using 16-degree wire collated coil nails for siding, can be quite useful.

Hitachi gives a 5-year warranty with its power tool products because it is a well-known and reliable brand. Even the build quality of this pneumatic siding nailer is exceptional. Additionally, since it is a pneumatic siding nailer, operating it requires connecting it to an air compressor.

Regarding air pressure, it can readily function between 70 PSI and 120 PSI. When you run out of siding nails, this siding nailer has a magazine on the bottom for quick and simple reloading.


  • High-performance numbers
  • Easy adjustment options
  • Ergonomic design


  • A bit expensive
  • Low magazine capacity

MAX CN565S3 Siding Coil Nailer

Compared to other brands of power tools on the market, Max is a less well-known one. Even so, a lot of customers will find its siding nailer to be a great choice because it has good performance and durable construction.

When compared to other options, the Max CN565S3 is one of the more upscale or pricey siding nailers available. Even yet, many users could find that its performance and build quality make up for the cost. You can use 1 1/2-inch to 2 1/2-inch long nails for siding while using this nailer, just like you can with the other options listed in this article.

With the aid of any air compressor, it enables you to drive these siding nails with ease and accuracy. To ensure that you do not experience any performance concerns while using this siding coil nailer, all you need to do is maintain your air compressor between 70 PSI and 120 PSI.

You have a 5-year warranty with it because the Max power tool brand is one of the more costly ones, which is reasonable given the price. You shouldn’t experience any problems with it later on when combined with its maintenance-free end cap filter. This siding nailer’s 360-degree twist-adjustable exhaust deflector is another useful feature. You can blow air out from yourself using it without it interfering with your task.


  • Decent reliability
  • High-performance numbers
  • Easy to use


  • Expensive
  • Average build quality

Hitachi Coil Siding Nailer

As was already noted, a variety of pneumatic siding nailers are produced by Hitachi or Metabo HPT for use in buildings. As a result, Hitachi is providing us with yet another siding nailer.

The final Metabo HPT option mentioned in this post and this Hitachi NV65AH2 siding nailer are fairly comparable. When utilizing this siding nailer for construction, you get the same support for nails that are between 1 1/2 and 2 1/2 inches long.

Because it is a pneumatic tool, it can easily drive these nails. An air compressor with a working air pressure range of 70 PSI to 120 PSI must always be connected by the user. After it is finished, you can drive 2 1/2 inch nails quickly—up to three nails per second—which can help the user save a lot of time.

This Metabo siding nailer has a 5-year warranty, much like the preceding HPT siding nailer. Along with this, it also has a wonderful build quality, which is always a plus. Even though it is extremely sturdy and resilient, it only weighs 4.8 pounds, which is reasonable given the capabilities it offers.

Additionally, a tool-free depth adjustment system is provided to provide great operating precision. To keep pressured air away from you, it has an adjustable air deflector.


  • Lightweight and portable design
  • Highly reliable
  • Decent performance


  • Discontinued model
  • expensive

DEWALT DW66C-1 Fencing Nailer

You must be familiar with Dewalt if you are familiar with power tools. Dewalt manufactures a large variety of electric equipment in addition to a fantastic pneumatic siding nailer alternative.

According to its name, the Dewalt DW66C siding nailer has a 15-degree angle adjustment. For many different kinds of applications, this can be highly useful. It can accommodate siding nails that are between 1 1/2 and 2 1/2 inches long without any problems.

Additionally, these nails can be wire or plastic sheet collated depending on your needs. This siding nailer comes with a nail magazine that holds a total of 300 of these nails. This implies that while working at 70 PSI to 120 PSI operational air pressure, you won’t need to keep replacing nails.

Dewalt provides a 3-year warranty with its tool, the same as Makita does. However, despite the fact that it only weighs 4.9 pounds, you still get decent strength because of the aluminum body. This siding nailer uses rubber in addition to metal in a number of locations to prevent harm to the work area. Its concept of toolless adjustment may come in helpful for various work requirements and wants.


  • Lightweight design
  • Works with various kinds of nails
  • Rubber parts in multiple places


  • A bit large
  • Average performance

Types of siding nailer

Knowing the various siding nailer kinds can help you choose the right one for the project. Do you realize that not all siding nailers are suitable for your work? So, here are the siding nailers of every description.

Pneumatic Siding Nailers

Pneumatic siding nailers are the first variety of siding nailers. It operates on air pressure, as its name suggests. To achieve the finest results, you must use the best air compressor. It has a lot of power and is utilized for labor-intensive tasks.

Cordless siding nailer

A cordless nail gun may be your best option if you need to operate without a cord or wire or if you need to work in an area with no power sources. It draws energy from the battery rather than the atmosphere. It lacks the pneumatic nailer’s power as a result. However, it excels at delicate tasks.

Coil siding nailer

The metal piston of this style of coil siding nailer is propelled by a solenoid. With this prison, you’ll discover a front rod that drives the nail. A number of the solenoids are drawn to its projectile. This nailer is a good choice if you require maximum power because you may turn off individual solenoids to increase power steadily.

How to Choose the Best Siding Nailer:

You must select the best quality siding nailer to complete your task, whether it is for low-volume DIY use or demanding professional use. Using the incorrect tool can prevent you from obtaining the desired outcome and will have an adverse effect on your experience.

In order to assist you in making the best choice, we are offering a shopping guide with all the information pertaining to siding nailers.

Let’s go over the specifics of things to look for when buying a siding nail gun.

Nail Sizes

A versatile instrument is absolutely necessary to complete many jobs. In other words, the nailer will enable you to work on a variety of tasks by using more/different sizes of fasteners. It is not just applicable to nails that are longer. The nail size should typically be twice as deep as the material you are working with. For instance, when working with 1/2-inch material, a nailer capable of firing 1-inch nails is needed. Choose a model that can accommodate a variety of nail sizes.

Standard siding nailers will often use nails that are between 1 1/4 and 2 1/2 inches in length to do the work quickly, conveniently, and effectively. Therefore, before making a purchase, we advise you to confirm the siding nailer’s supported nail size. Due to their limited ability to change sizes, coil nailers require this in particular. Additionally, nailers with a typical magazine can accommodate nails up to 2 1/4 inches long.

Operating Pressure

This power tool uses a pneumatic siding nailer that is powered by an air compressor. Here, the compressor’s operating pressure will determine the force needed to fire the nail or fastener. Psi, or pounds per square inch, is the unit of measurement for this working pressure (PSI). Choose a siding nailer with a compressor that is portable, lightweight, and operates between 70 and 120 PSI.

Ascertain that the hose connecting your nailer to the air compressor (air inlet) will fit precisely and be able to sustain high pressure. For some variants, the maximum operating pressure is 320 PSI. The siding nailer will operate more aggressively at higher air pressures.

Nail Capacity

You can work for longer periods of time with a nail gun with a larger capacity if you don’t frequently reload them. Therefore, with continued use, a nailer with a bigger nail capacity will increase output. Select a nailer that can hold 200–400 nails and takes nails measuring 1 1/2–2 1/2 inches (either wire or plastic nails). Before refilling the nailer, these nails may readily store up and fire hundreds of times.

Depth Adjustment

Generally speaking, the degree of resistance will differ from one type of material to another. For instance, concrete siding offers a little bit more resilience than wood. This indicates that in order to complete your task flawlessly, a nailer with a different firing depth adjustment is needed. Select a model that has depth adjustment so that you may change it to meet your needs for nail firing dependent on the material (vinyl, wood, or hard concrete surfaces).

Additionally, you may use different-length nails and adjust the firing pressure to make it function on a variety of siding materials or surfaces. Fixed depth, however, won’t force you to utilize the same nailer for handling various materials. While preventing both under-shooting (where the hole needs to be patched) and over-shooting (use a hammer to drive exactly).

Some contemporary models allow dial-controlled, tool-free depth adjustment. They enable you to swiftly adjust the driving depth in accordance with the requirements of the material and nail length used in your project. This depth may be accurately adjusted, which will make it easier for you to complete your work.

Jam Removal/Anti-Jam Mechanism

Most siding nailer users frequently find jamming a problem. There are a number of causes for this jamming, which primarily occurs at the nailer’s snout, including a less expensive model, an inefficient mechanism, problems with the nail coil, and small pieces of dirt. Whatever the cause of the jamming, you must select a model that enables you to swiftly and easily clean the internal blockage.

Some types include needles for unjamming. Choose a model that has easy access to this part and can rapidly remove the jam without using a tool kit because this jam typically occurs close to the nose of a nailer.

Firing Modes

A siding nailer typically has two modes of operation: sequential and contact (Bump). Contact mode offers more safety and a superior result. They only start firing when you apply pressure to the nailer’s head. The optimal shooting mode for experts or pros is as a result. While the sequential mode is simple to use and convenient, making it the best choice for beginners. But the ending is actually rather good. Additionally, they continually discharge like a rapid-fire to speed up your task.

To expedite the project and usage in a variety of settings, pick a model with several firing modes; even standard is a great choice. Additionally, its selectable trigger will make it simple for you to change between shooting modes. a design with a lock mode setting as an added safety measure to prevent any unintentional fire.


The kind of magazine a nailer has will affect how simple it is to use. You have two options for loading the nailer’s magazine: side loading or tilting the bottom magazine. However, selecting a nailer with a translucent or clear magazine compartment will help you to see when you run out of nails or what size you are loading into the nailer. The nailer can hold up to 400 fasteners in its maximum magazine capacity. Before you refill the magazine, it may store and drive hundreds of nails if the nails are small.

Weight & Size

A siding nailer’s size and weight will influence its balance, which in turn will determine how well it performs. So the perfect kind of nailer is one that is compact, lightweight, and well-balanced. When the top or bottom of the siding nailer feels heavier, it makes you feel uneasy and stresses the hand or wrist right away, especially when used for a prolonged period of time.

The typical weight range for siding nailers is 4 1/2 to 6 1/2 pounds. Remember that we use ladders to access higher or uncomfortable places; therefore, a huge unit or heavy instrument won’t give the right balance and will be difficult to control. Therefore, use a nailer that is portable, lightweight, and simple to maneuver.


No of the size, shape, or weight, holding a siding nailer for an extended period of time will cause hand fatigue. To prevent tiredness, we advise you to select a model with ergonomic handles that are simple to grasp (not too thick or thin). To avoid sliding and weariness when working on lengthy projects, it should also give a strong handgrip and properly fit into your palm.

Adjustable Exhaust

A regular exhaust vent is another feature that gets rid of potentially harmful bursts of air blowing on the face, especially on pneumatic siding nailers. They use pressured air to shoot the nails, and for the nailer to function properly, this air needs to escape. So choose a nailer with a 360° adjustable multi-directional exhaust to steer exhaust away from you and other people involved in your project.

Durability & Build Quality

Everyone wants the tool or product they buy to endure longer without needing to be repaired or replaced with new parts. To make it happen, before purchasing a siding nailer, make sure the product is durable. Its construction quality, which in turn depends on the kind of material chosen for its housing, determines how durable it will be.

The two major materials used in the production of these siding nailers are aluminum and magnesium. These are solid, long-lasting materials that are easily corrosion and rust-resistant. A built-in filter is present in a few versions to shield the inside components from dust and particles from the outside world. It increases the tool’s durability in this way.

Additionally, both of these housing materials feel solid and light in your hands, allowing you to hold the tool for a longer period of time comfortably and without any loose ends.

Performance & Speed

The performance of a product is affected by a number of elements, including the operator’s skill, the model’s structure, and design, and its features. Select a siding nail gun that achieves a perfect finish, precision, control, consistency, and efficiency while driving the nail exactly without going too deep or too shallow. Use a selectable trigger on your nailer to make sure it has a dual firing mechanism (bump fire or single fire mode) that can be used in any condition (equitably on any surface).

It takes careful planning and a moderately fast nailer to install siding properly. Depending on the sort of material you are dealing with and the needs of the job, choose the speed. Make sure not to harm the material by using excessive force during nailing, but use enough force for a solid attachment. A great balance between power and speed is provided by most models to ensure optimal siding.


Collation, also known as organization or assembly, is the process of carefully aligning the nails so that they fit inside the magazine. These siding nailers typically use wire-collated and plastic-collated nails. This will have an impact on a number of factors, including nailing speed and jamming frequency.

Cheaper and less dependable plastic collated nails that break easily (both outside and inside the magazine) and cause lockups and jams are collated nails made of plastic. These are held in place by plastic.

Thin metal strips are welded into the nails to create wire (or weld-wire) collated nails. a solid alternative that effectively feeds the nailer to avoid jams. Similar to plastic collated nails, these nails are positioned parallel to one another.

You can select the collation that best suits your needs (or hunt for a nailer that supports both collations, such as the Boston N66C-1), making it more adaptable and useful for a variety of applications.


A multifunctional siding nailer is useful if you work in a professional capacity or must manage a variety of activities. It becomes the finest choice to work on a number of projects thanks to its capacity to install various siding materials (such as aluminum, wood, or vinyl). The siding nailer is a useful tool to use for other projects like fences because it accepts various nail collations.

The tool’s adaptability will also depend on its power output. A strong siding nailer can easily drive multiple nail sizes and kinds into diverse materials, making it more adaptable than a weaker one.


You may do your task fast and effectively without experiencing any problems if you utilize an easy-to-use and simple-to-control siding nailer. Various factors, including weight, size, magazine loading simplicity, selectable fire modes, jam clearing mechanisms, and design, influence the control option. Choose a lightweight nailer with an ergonomic handle if you want to use it for extended periods of time with minimal fatigue.


In addition to the build quality, you should look into the nailer’s guarantee if you want to use it for a long period with minimal wear and tear. Because aluminum housing strikes the right mix between build quality and robustness, the majority of these nail guns employ it.

It is crucial to look into the warranty period provided by a siding nailer because it guarantees that the specified model is robust and dependable. While the majority of available options have a one-, three-, or five-year warranty, some more dependable ones even have a seven-year warranty. A product with a longer warranty will provide you with assurance.

Frequently Asked Questions:

What’s the difference between wire-collated nails and plastic-collated nails?

Plastic collated nails typically weigh less than wire collated nails while being stronger and more durable. Both of these varieties can be used for a variety of tasks, such as sheathing, framing, or fencing. Particularly, wire collated nails are great for Hardie siding while plastic nails are best for face nailing.

Are there any cordless siding nailers available?

There won’t be any battery- or cordless-powered siding nailers on the market. Modern siding nailers are almost exclusively pneumatic models powered by air compressors.

Shall we use brad nailer instead of siding nailer for siding work?

No, a brad nail gun is inappropriate for siding construction. The brad nails we often use for siding projects are not strong enough to hold the material. They are accustomed to working on little jobs like upholstery.

Which one is considered the best to do the siding process?

Due to its durability and resistance to corrosion, stainless aluminum is the most popular and best nail for wood siding applications.

What is the difference between framing nailer and siding nailer?

Because they resemble each other and are used interchangeably for similar activities and works, the siding nailer and framing nailer are frequently compared by most people. However, if you look closely, you will see that both are distinct instruments that are meant to be used for very specialized tasks (even if siding nailers are mostly used for upright, even though nailing in limited areas).

However, you can tell them apart by the length of the nails they can easily accept—a framing nail gun can take nails up to 3 12 inches long, while a siding nailer can take nails between 1 14 and 2 12 inches. Additionally, during the siding procedure, nails with a broader head are employed. Additionally, siding nailers can weigh up to 6 pounds while frame nailers can weigh a maximum of 9 pounds.

What sort of nails do we regularly use for siding?

The nails used for this siding will range in size from 1 to 2 1/2 inches because the siding won’t be nailed tightly (or 3-inch in rare cases). However, you must insert up to 3/4-inch long nails into the base (if it is not up to the mark then the siding gets flimsy if deeper the integral might damage). The installation of an additional material layer between the foundation and siding necessitates the use of a long nail.

Therefore, before driving the nails from the siding nailer, it is crucial to double-check the nail measurements. All you need to keep in mind is that every siding work or job is different, and you must immediately select the appropriate nails based on the particular siding requirement.

Shall we use a siding nail gun to do tasks other than siding?

It mostly depends. You should be aware that there are more uses for the siding nail gun. A siding nailer can be used for little projects like making minor repairs around the house (if it has adjustable pressure), but not for heavy-duty nailing tasks like roofing.


It’s crucial for you to get the greatest siding nailer since it will enable you to complete your siding project with the necessary power and precision. It will be really difficult for you to do your assignment accurately and effectively without a good one. In order for you to choose the best siding nailer, we have reviewed some of the best models along with their features and advantages. They are all excellent and offer significant user value. If you ask for my advice, I will advise choosing the BOSTITCH Siding Nailer. It offers a number of advantages that you would not find in other nailers, including extreme power, greater accuracy, longevity, and a higher nail capacity.

1 thought on “Best Siding Nailer Reviews and Buying Guide”

Leave a Comment